Taking great care of a commercial roofing in Brampton that lasts for years to come is important for the success of your business. For sure, any business owner would dread to deal with untimely and very costly roof replacements as a result of roofing problems that would have been mitigated through prompt maintenance.

Commercial Roof Repair in Brampton

If you think your roof is damaged and failing, the best and smartest thing you should do to do is to call your Brampton roofing contractors. These contractors will completely assess your roof to confirm the problem, uncover other hidden roofing damages, and suggest the best course of action.

As a concerned commercial building owner, what are some simple ways to inspect your roof so that you can immediately call and report possible problems to your professional roofer?

This quick guide we have prepared will help you. Without further ado, here are quick inspection tips that Brampton roofing owners should follow.

2 Areas to Check When Doing a Visual Roofing Inspection

The key to a proper commercial roof inspection is to know where to check for problems. 2 areas to check are the surface of your roofing (this involves going up your roof) and the interior of your building.

By visually inspecting the state of a roof and knowing what problem signs to look for, you’ll be able to get a roof repair in Brampton in no time. In the next section, we will talk about the common signs of existing roofing problems while looking at the 2 areas we just told you about.

Signs of Roofing Problems

  1. Surface of Your Commercial Roof


If you are wondering what roof blisters are, these are raised or protruding spots on the surface of your roof. These pockets contain trapped air or moisture as a result of increasing temperature from the sun. This causes air or moisture to escape through the substrate.

You should know that blistering is a permanent problem. Even if the temperature gets cooler, the blisters won’t go away. In fact, the longer you let them stay, the bigger they get. Unless you get a roof repair Brampton, these blisters put your roof at risk for extensive water damage.


Have you seen an alligator’s hide? If you did, then this is what roof alligatoring looks like. You’ll see multiple cracks on the surface of your roof as a result of the damaging UV rays from the sun. These cause your roof to age fast. If left unattended, these cracks will allow water and moisture to enter which leads to roof leaks.

Try to notice whether other commercial building owners in your area are getting their roofs replaced. Also, check the year when your Brampton roofing was first installed. If the age of your roof is more than 20 years, this is a sign that you need to get a professional inspection from your roofing contractors.

Ponding or pooling water

Ponding water is a common problem among commercial roofs and should be remedied immediately. Ideally, water must not pool on your roof because it should flow off your roof within two days (48 hours). If you don’t check the top of your roof, you might miss this problem that can accelerate its aging process.

Roof ponding has several consequences which include leaks, mold growth, pest infestation inside your building, and deformation of the roof deck. Before repairing the damage, your roofer will evaluate the situation, remove the ponding water, and identify possible causes like clogged drains, low spots, or structural issues.

  1. Interior of Your Building

Water marks or stains

Do you see water stains on ceiling or walls of the top most floor of your building? If so, these are an indication of water infiltration. When it rains, you’ll be able to confirm the presence of active leaks by seeing water dripping from the ceiling and puddles on the floor. Be careful because these can cause accidents.

Commercial roofing leaks result from multiple factors which include open roof penetrations, aging, and clogged drainage. Therefore, it’s very crucial that you install a roofing system that lasts longer and resists water penetration in case it gets punctured.

Mold growth and musty smells

The quality of your indoor air can be affected by the presence of mold. Mold starts to grow inside your building when there is a water leak. A damp and moist environment is a good place for mold to thrive. If you see black streaks or spots on the surface of your walls accompanied by musty smells, this is indicative of mold.

Exposure to mold inside your building is harmful to everyone’s health – you and your tenants’. Whether or not you confirm the presence of an active roof leak, contact your roofer to schedule a free thorough inspection and repair after they find the source of the leak.

Other Signs that Point the Need for a Brampton Roofing Repair

There are still other signs that indicate a problem on your commercial roof such as increasing energy bills for no obvious reason, uncomfortable temperatures (warmer summers and colder winters), corrosion of HVAC components, and pest infestation.


A lot of things can tell you that there is a problem with your roof. Being able to conduct a simple inspection on your end can be the first and most crucial step to preventing bigger issues that require extensive repairs. Your commercial roofing system is a huge investment since it protects your business and the people in it from outside elements.

Once you discover the signs we outlined in this article, feel free to contact Cox Roofing Systems to schedule a complete assessment. Our roofing contractors in Brampton are properly trained to perform any kind of repairs. Also, we perform a roof repair in Mississauga if you ever need one.